水下对转螺旋桨流致辐射噪声机理与预报方法*

水下对转螺旋桨流致辐射噪声的预报对于水下目标的特征提取和分类识别具有重要意义。由桨叶的旋转引起的湍流场是水下对转螺旋桨流致辐射噪声的源场。分述了水下对转螺旋桨湍流边界层脉动、旋转干涉效应和空化效应引发的水动力噪声机制和研究进展,比较了目前工程应用中的3种对转螺旋桨流致辐射噪声预报方法的特点。在分析对转螺旋桨流致辐射噪声数值预报难点的基础上,综述了对转螺旋桨流致辐射噪声计算方法的研究进展,指出间接数值模拟方法是工程中进行对转螺旋桨流致辐射噪声预报的有效方法。     

碟形超声变幅杆的设计

优化超声变幅杆的形状结构可有效地提高水域声场分布和空化区域,提升对水域超声空化效果。通过模拟分析发现传统超声变幅杆在水域中具有声场分布均匀性差、变幅杆端部声压高等特征,不利于声波在水域中传播。基于此,提出并优化设计了一种具有碟形结构的变幅杆,位于变幅杆的最大振幅处的碟形结构,有更大的振动位移;模拟表明其水域声场和声压均衡度显著优于传统变幅杆,铝箔空化腐蚀实验进一步证实了其水域中的声压分布均匀性。同时,实验通过铝箔的空化腐蚀、KI剂量测定及工件表面油渍去除对比了传统变幅杆和碟形变幅杆,分析表明碟形变幅杆所在水域中有较大的空化腐蚀区域,腐蚀速率明显提升,声化学反应速率提高,油渍去除程度增强,说明了设计的碟形变幅杆能够促进空化泡的产生,增加水域空化区域。     

富里叶级数的收敛速度

对正弦和余弦富立叶级数,通过合并相邻同号项,使其重排成交错级数.讨论了重排形成的交错级数的敛散性.指出根据自变量x的不同取值,该交错级数可能是单调递减或周期递减的级数.按照莱布尼茨判定法提出了不同精度要求的级数项数的计算公式.选取一到三阶收敛的富立叶级数计算了不同比值精度及差值精度要求的级数项数.计算表明,在x的取值为2π的等分点时,富立叶级数的部分和随项数的增加单调地逼近其收敛值.在x的取值为其它点时,富立叶级数的部分和随项数的增加围绕收敛值上下变动,周期地逼近其收敛值.低收敛阶富立叶级数的收敛速度较慢.要达到0.01%的精度,一收敛阶富立叶级数需要数万项,二收敛阶富立叶级数也需要数百项.在不同计算点处,要达到相同的计算精度,需要的级数项数差别较大.     

Degradation of chitosan with self-resonating cavitation

For the degradation of chitosan, a novel physical method of self-resonating cavitation with strong cavitation effects was investigated in this paper. The effects of initial concentration, pH, temperature, inlet pressure and cavitation time on the degradation efficiency of chitosan were evaluated. It was found that the degradation efficiency was positively correlated with temperature and cavitation time, but was negatively correlated with the solution concentration. The degradation efficiency was maximized at pH of 4.4 and inlet pressure of 0.4 MPa. Under the experimental conditions, the intrinsic viscosity of chitosan solution was reduced by 92.2%, which was twice as high as the degradation efficiency where a Venturi tube cavitator was used. The viscosity-average molecular weights of initial and degraded chitosan were 651 and 104 kD, respectively. The deacetylation degree of chitosan slightly decreased from 89.34% to 88.05%. Structures and polydispersity of initial and degraded chitosan were measured by Fourier-transform infrared spectroscopy (FT-IR), nuclear magnetic resonance hydrogen spectroscopy (¹H NMR), X-ray diffraction (XRD) and gel permeation chromatography (GPC). The results showed that the degradation process did not change the natural structure of chitosan. XRD peaks of the original chitosan were observed at 2θ of 9.59° and 20.00°, and the one at 2θ of 20.00° was obviously weakened after the degradation process, which indicated that the crystallinity of chitosan decreased significantly after the degradation. The polydispersity index of chitosan samples decreased from 3.17 to 2.75, indicating that the molecular-weight distribution of products after the degradation was more concentrated. The results proved that self-resonating cavitation prompted the degradation of chitosan and could reduce the polydispersity of the products for the production of oligochitosan with homogeneous molecular weights.     

水火箭的制作与发射——初中物理教学课外活动拓展

物理课外实验能让学生真正动手操作、体验,从而提高学生的物理核心素养.水火箭的制作与发射,蕴含知识面广,发射效果震撼,能让学生对物理与科技的联系有直观深刻的认识.     

燃气透平叶片表面颗粒沉积特性数值研究进展

污染物颗粒在燃气透平叶片表面及冷却通道内的沉积将影响透平叶片的冷却特性和安全服役寿命。国外许多研究机构对燃气透平叶片表面污染物颗粒沉积特性及其与叶片气膜冷却的相互作用机制进行了持续研究。本文首次系统总结了近年来燃气透平叶片表面污染物颗粒沉积特性数值研究进展,重点介绍了燃气透平叶栅流道内污染物颗粒的沉积机制、颗粒沉积和脱离物理模型以及颗粒沉积与透平叶片冷却特性相互作用的数值模拟方法和研究成果。基于当前研究热点和发展趋势,结合作者的研究经历,指出了国内在研发先进燃气轮机透平冷却结构时应注意的问题和方向,为高效、燃料适应性更广的燃气轮机技术自主开发奠定基础。     

绝缘环打火研究

绝缘问题是高电压、高场强器件和设备中不可回避的问题,是决定器件、设备运行参数和稳定性的重要因素。针对一台直线感应加速器调试中出现的加速腔绝缘环在带束负载情况下的真空沿面闪络现象,进行了分析和研究。分析表明,在排除设计、材料、加工、洁净和真空度等常规异常因素后,导致绝缘环真空沿面闪络的可能因素是电子在绝缘环表面的吸附和累积,绝缘环上累积的电子来源和加速器中加速、传输的电子束的丢失有关。从加速腔工作状态出发,分析绝缘环表面积累电荷和丢失电子束的相关途径,进而提出相应的技术措施,以提高加速腔运行稳定性。     

多路Marx并联高压脉冲电源研究

脉冲功率技术在工业和生物医学领域有着广泛的应用,很多应用场合要求输出数百安培的高压脉冲。固态Marx发生器虽已研究多年,但是被广泛采用直插封装的IGBT和MOSFET功率半导体开关管的额定电流通常都低于100 A,无法满足低阻抗负载的应用需求。为提高输出脉冲电流幅值,提出两种多路Marx发生器并联的脉冲电源的拓扑结构,第一种方案采用多路Marx发生器直接并联,第二种是共用一组充电开关管的多路Marx发生器并联。由FPGA提供充放电控制信号,采用串芯磁环隔离驱动方案实现带负压偏置的同步驱动,主电路选用开通速度快、通流能力强的IGBT为主开关的半桥式固态方波Marx电路。实验结果表明,6路16级Marx直接并联的脉冲发生器能输出重频100 Hz高压方波脉冲幅值可达10 kV,在30Ω负载侧输出峰值电流可达300 A,上升时间230 ns。共用充电开关管的6路4级Marx并联发生器在5Ω电阻负载上的输出电流峰值可达300 A,最大输出电流可达460 A,上升时间272 ns。表明多路Marx发生器并联可以有效地减小系统内阻,提高系统带载能力;改进后的并联方案实现大电流脉冲输出的同时,所采用的开关管数量减小近一半,提高了系统的抗干扰能力的同时,降低了脉冲电源的成本;且增加级间并联导线可进一步改善均流效果。     

One-step ultrasonic synthesis of Co/Ni-catecholates for improved performance in oxygen reduction reaction

The inherent periodically arranged M−N_X, M−S_X and M−O_X units (M are usually Fe, Co, Ni, etc.) in metal–organic frameworks (MOFs) can be promising active centers in electrocatalysis. In previous studies, MOFs were usually constructed by energy-consuming hydro- or solvo-thermal reactions. Ultrasonic synthesis is a rapid and environment-friendly technique when envisaging MOFs’ industrial applications. In addition, different synthetic pathways for MOFs may lead to difference in their microstructure, resulting in different electrocatalytic performance. Nevertheless, only a handful of MOFs were successfully prepared by ultrasonic synthesis and few were applied in electrochemical catalysis. Herein, we constructed Ni/Co-catecholates (Ni/Co-CATs) synthesized by one-step ultrasonic method (250 W, 40 KHz, 25 W/L, Ultrasonic clearing machine) and compared their performance in oxygen reduction reaction (ORR) with that of Ni/Co-CATs synthesized by hydrothermal method. Ni-CAT and Co-CAT prepared by ultrasonic showed the half-wave potential of −0.196 V and −0.116 V (vs. Ag/AgCl), respectively. The potentials were more positive than those prepared by hydro-thermal method. And they showed excellent electrochemical stability in neutral solution. The latter was only 32 mV lower than that of commercial Pt/C. The improved performance in ORR was attributed to higher specific surface area and mesopore volume as well as more structural defects generated in the ultrasonic synthesis process, which could facilitate their exposure of electrocatalytic active sites and their mass transport. This work gives some perspective into cost-effective synthetic strategies of efficient MOFs-based electrocatalysts.